
Mobil Delvac 1 SHC 5W-40
Mobil Delvac 1 SHC 5W-40. Moteurs diesel. Conditionnement et disponibilité confirmés dans le devis.
Informations produit
Texte en anglais, tel que fourni dans le document de la société.
Features and Benefits
Features
Advantages and Potential Benefits
Excellent thermal and oxidation stability
- Control of low temperature sludge build-up and high temperature varnish deposits
- High TBN
- Helps towards extended drain intervals with high sulphurfuels
- Advanced formulation and viscometrics
- Maintains viscosity in severe, high temperature service
- Excellent low temperature pumpability
- Easier engine start-up and reduced wear
- Good resistance to corrosion
- Helps towards long life of critical wear surfaces
- Long drain capability
- Helps towards good operating efficiency and lower overall cost
- Component compatibility
- Long gasket and seal life, extended service intervals
- Low volatility, excellent wear and bore polishing control
- Good oil consumption control
Modern high output diesel engines run hotter than older engines which significantly increases the demands on engine lubricants. Current tighter engine designs reduce oil consumption, resulting in less fresh oil makeup to replenish depleted additives. Top piston rings are located higher bringing the oil film closer to the combustion chamber where temperatures increase thermal stress on the lubricant. Mobil Delvac 1 SHC 5W-40 helps to protect the engine under severe operating conditions. It is also fully compatible with conventional mineral oils.
Applications
- Mobil Delvac 1 SHC 5W-40 is recommended for use in super high perfrmance diesel applications including turbo-charged and naturally aspirated engines designs
- These applications include: on-highway engines operating in both high speed/high load and short haul pick-up/delivery; off-highway and marine engines operating in severe low speed/heavy load conditions
- Diesel powered equipment from European builders
| Famille | Produits finis |
| Catégorie | Huiles diesel poids lourds |
| Marque | Mobil |
| Grade / viscosité | 5W-40 |
| Classe de performance | — |
| Conditionnements | Conditionnement sur demande |
| Données techniques | Dans la TDS, sur demande |
Données issues des documents de la société, en attente d’approbation finale. Les valeurs chiffrées de chaque lot figurent dans la TDS.
